TMPL_10001_cFIG.txt
ToolVersion (5): 2-byte integer (decimal)
BaudRate: 4-byte integer (decimal)
Data: 2-byte integer (decimal)
Stop: 2-byte integer (decimal)
Parity: 2-byte integer (decimal)
SWHS in: 1-byte integer (hex)
HWHS in: 1-byte integer (hex)
XON char: 1-byte integer (hex)
XOFF char: 1-byte integer (hex)
Error mask: 1-byte integer (hex)
Event mask: 1-byte integer (hex)
SWHS out: 1-byte integer (hex)
HWHS out: 1-byte integer (hex)
Portname: pstring (1-byte length; 256 bytes reserved)
Flags: 2-byte integer (hex)
Phone #: pstring (1-byte length; 256 bytes reserved)
Rings: 2-byte integer (decimal)
Dial Mode: 2-byte integer (decimal)
Carrier: 2-byte integer (decimal)
Config Mode: 1-byte integer (hex)
Retry: 1-byte integer (hex)
Retry Limit: 2-byte integer (decimal)
Retry Interval: 2-byte integer (decimal)
Modem Flags: 2-byte integer (hex)
Init String: pstring (1-byte length; 256 bytes reserved)
Actual Speed: 4-byte integer (decimal)
Ring String: pstring (1-byte length; 256 bytes reserved)
Make String: pstring (1-byte length; 256 bytes reserved)
Disable Hardware MNP Command: pstring (1-byte length; 256 bytes reserved)
Hardware MNP Engaged String: pstring (1-byte length; 256 bytes reserved)
Cabling PICT ID, 0 = default: 2-byte integer (decimal)
Maximum AT Command Length, 0 = default ( 40 ): 2-byte integer (decimal)

TMPL_10000_modm.txt
Version 
(should be 2): 2-byte integer (decimal)
(bit field)
  Reserved bit: boolean
  Reserved bit: boolean
  Modem will enter to command mode after a break: boolean
  Reserved bit: boolean
  Reserved bit: boolean
  Reserved bit: boolean
  Reserved bit: boolean
  Modem should default to Hardware MNP: boolean
(bit field)
  Modem should default to Software MNP: boolean
  Modem can support Software MNP: boolean
  Modem can support Hardware MNP: boolean
  Reserved bit: boolean
  Direct mode (baud buffered): boolean
  CONNECT means 300 bps with this init string: boolean
  Reserved bit: boolean
  Carrier Detect Signal provided: boolean
Initialization String: pstring (1-byte length) (padded to 2-byte alignment)
Ring Response String: pstring (1-byte length) (padded to 2-byte alignment)
Preferred Baudrate 
(0 if none): 4-byte integer (decimal)
Preferred Port
(empty if none): pstring (1-byte length) (padded to 2-byte alignment)
Preferred Handshake
0 any
1 None
2 XOn/XOff
3 DTR/CTS
4 DTR
5 CTS: 2-byte integer (decimal)
Disable Hardware MNP AT Command: pstring (1-byte length) (padded to 2-byte alignment)
Hardware MNP Confirmation String: pstring (1-byte length) (padded to 2-byte alignment)
Cabling… PICT resource: 2-byte integer (decimal)
Break duration in ticks to enter command mode ( 14 = short, 210 = long ): 2-byte integer (decimal)